TBP Dental Bearings for High speed
Handpiece and Low speed Handpice
Ceramic balls for each type are available! |
|
|
Ref. No. |
Feature |
d
I.D. |
D
O.D. |
B
Width |
D1 |
C1 |
Shield |
Main Application |
|
TBP#01 |
Smooth |
3.175
(1/8")
.125" |
6.35
(1/4")
.250" |
2.38
(3/32")
.0937" |
|
|
0 |
same as
#02 |
|
TBP#02 |
Smooth |
3.175 |
6.35 |
2.38 |
|
|
1 |
NSK,
Midwest, W&H, Lares(front) |
|
TBP#03 |
Grooved |
3.175 |
5.97 |
2.38 |
6.35 |
1.34 |
0 |
same as #04 |
|
TBP#04 |
Grooved |
3.175 |
5.97 |
2.38 |
6.35 |
1.34 |
1 |
Siemens
4000,TM1,TS1 & Dabi-Atlante MS 350,RS 350 |
|
TBP#05 |
Smooth |
3.175 |
6.35 |
2.38(outer)
2.78(inner) |
|
|
Integral |
KaVo
6000M/7000M(Front)
Dabi Alante |
|
TBP#06 |
Grooved |
3.175 |
5.97 |
2.38(outer)
2.78(inner) |
6.35 |
1.34 |
Integral |
KaVo
6000M/7000M(Rear)
KaVo635B(Rear)
Dabi Alante |
|
TBP#07 |
Smooth |
3.175
(1/8")
.125" |
6.35
(1/4")
.250" |
2.78
(7/64")
.1094" |
|
|
Integral |
same
as #08 |
|
TBP#08 |
Smooth |
3.175 |
6.35 |
2.78 |
|
|
1 |
Bien
Air Ondine,Prestige, NSK, W&H, Canisters |
| TBP#09 |
Grooved |
3.175 |
5.97 |
2.78 |
6.35 |
1.78 |
Integral |
same
as #10 |
|
TBP#10 |
Grooved |
3.175 |
5.97 |
2.78 |
6.35 |
1.78 |
1 |
W&H
KaVo 624/625/630/640 - 647/649/650 |
| TBP#11 |
Flanged
Unique |
3.175 |
6.35 |
2.78 |
7.5 |
0.4 |
1 |
Star
430
/ADVANTAGE/
VISTA |
|
TBP#12 |
Flanged |
3.175 |
6.35 |
2.78 |
7.5 |
0.8 |
1 |
Midwest,
NSK, Castellini |
|
TBP#13 |
Flanged
Unique |
3.175 |
6.35 |
2.78 |
7.5 |
0.4 |
Integral |
same as #11 |
|
TBP#14 |
Smooth |
3.175
(1/8")
.125" |
7.938
(5/16")
.3125" |
3.571
(9/64")
.1406" |
|
|
1 |
Bien Air |
|
TBP#15 |
Smooth |
3.175
(1/8")
.125" |
6.35
(1/4")
.250" |
1.91(outer)
1.60(Inner) |
|
|
0 |
Lares (rear) |
|
TBP#16 |
Flanged |
3.175
(1/8")
.125" |
6.35
(1/4")
.250" |
2.38
(3/32")
.0937" |
7.5 |
0.6 |
1 |
NSK
Mach-QD (Mini) & Pana Air (Mini) |
|
TBP#17 |
Smooth |
3.175
(1/8")
.125" |
7.938
(5/16")
.3125" |
2.78
(7/64")
.1094" |
|
|
1 |
|
|
TBP#18 |
Smooth |
3.175
(1/8")
.125" |
7.938
(5/16")
.3125" |
3.571
(9/64")
.1406" |
|
|
2 |
same
as #14 |
|
TBP#19 |
Smooth |
3.175 |
6.35 |
2.38 |
|
|
Integral |
same as #02 |
|
TBP#20 |
Flanged |
3.175 |
6.35 |
2.78 |
7.5 |
0.8 |
Integral |
same
as #12 |
|
TBP#21 |
Smooth |
3.175 |
6.35 |
2.78 |
|
|
0 |
same as #08 |
|
TBP#22 |
Grooved |
3.175 |
5.97 |
2.38 |
6.35 |
1.34 |
Integral |
same as #04 |
|
Note:
#02, #19 are same size, but #19 with integral shield.
#04, #22 are same size, but #22 with integral shield.
#07, #08 are same size,
but #07 with integral shield.
#09, #10 are same size,
but #09 with integral shield.
#11, #13 are same size,
but #13 with integral shield.
#12, #20 are same size,
but #20 with integral shield.
#14, #18 are same size, but #18 with double shields. Hole in shield is
available! |
|
mm |
inch |
inch |
| 3.175 |
1/8" |
0.1250 |
| 6.350 |
1/4" |
0.2500 |
| 3.571 |
9/64" |
0.1406 |
| 2.779 |
7/64" |
0.1094 |
| 2.380 |
6/64" |
0.0938 |
| 1.910 |
|
0.0752 |
| mm/inch=25.4 |
|
|
|
|
TBP #1, 2, 3, 4, 8, 10, 12, 14 are
most popular in the dental handpiece, KAVO, NSK, W& H, Midwest... |
| |
618/2.35X3/P5 |
Smooth |
2.35 |
5.5 |
2 |
|
|
0 |
|
| |
618/3/P5 |
Smooth |
3 |
6 |
2 |
|
|
0 |
|
| |
INTRA |
Smooth |
3 |
6 |
2 |
|
|
0 |
|
| |
618/3X3/TN1P4 |
Smooth |
3 |
6.35 |
2.38 |
|
|
0 |
|
| |
618/4/P5 |
Smooth |
4 |
7 |
2.5 |
|
|
0 |
|
| |
618/4X1/HVP4 |
Smooth |
4 |
7 |
2.5 |
|
|
|
|
| |
618/3X2-Z/P5 |
Smooth |
3 |
7 |
3 |
|
|
1 |
|
| |
693ZZ |
Smooth |
3 |
7 |
4 |
|
|
2 |
|
| |
|
|
4 |
7 |
2.5 |
|
|
2 |
|
| |
|
|
4 |
7 |
2 |
|
|
0 |
|
| |
683ZZ |
|
3 |
7 |
3 |
|
|
2 |
|
| |
|
|
3 |
7 |
2 |
|
|
0 |
|
| |
688ZZW6 |
|
8 |
16 |
6 |
|
|
2 |
|
| |
|
|
2 |
6 |
2.3 |
|
|
0 |
|
| |
|
|
2 |
6 |
3 |
|
|
2 |
|
| |
694ZZ |
|
4 |
11 |
4 |
|
|
2 |
|
| |
|
|
8 |
14 |
3.5 |
|
|
0 |
|
| |
|
|
8 |
14 |
4 |
|
|
2 |
|
|
|
|
|
Some Pictures & Drawings
 |
 |
 |
 |
| TBP#01 |
 |
| TBP#02 |
 |
| TBP#19 |
TBP#01 |
TBP#02 |
TBP#19 |
|
| |
 |
 |
| |
| |
|
|
TBP#03 |
TBP#04 |
|
|
|
 |
 |
|
| TBP#05 |
 |
| TBP#06 |
TBP#05 |
TBP#06 |
|
|
|
|
|
|
|
 |
 |
 |
| TBP#09 |
 |
| TBP#10 |
TBP#09 |
TBP#10 |
|
|
|
 |
 |
 |
| TBP#11 |
 |
| TBP#13 |
TBP#11 |
TBP#13 |
|
|
|
|
|
|
|
 |
 |
|
|
TBP#15 |
|
|
|
|
 |
 |
|
| TBP#12 |
 |
| TBP#16 |
TBP#12 |
TBP#16 |
|
|
|
 |
|
|
| Tools |
|
|
|
|
|
|
Notes & Explanation: |
|
Material:
|
| All parts are
produced from special medical-purpose materials on high-precision
machines. The quality of our products fulfils the highest standards
requested in this field. The final inspection of our products is 100%,
and our test conditions are much harder and demanding than during the
employment of the products in practice. |
|
Balls:
(Optional) |
Si3N4 Ceramic balls or
stainless steel balls
Ceramic balls: (20% harder than conventional bearings with steel balls, 50% the weight of the steel equivalent, frictional wear between the bearings and bearing retainers is significantly reduced, Noise is very low.)
SR144TL = (with steel balls)
SR144TL N = (with ceramic balls) |
Retainers
(Cages) |
Retainer also known as bearing cages.
TBP dental bearings use Torlon 4301 PAI, or Phenolic or Polyimide.
 |
Torlon Retainers
Torlon PAI (Bearing Grade) offers a very low expansion rate, low coefficient of friction and exhibits little or no slip-stick in use. This grade excels in severe service wear applications such as non-lubricated bearings, seals, bearing cages (bearing retainers) and in high
temperature environments. |
| |
|
 |
Phenolic Retainers
They are used for retainer cages for steel ball bearings especially
when exposed to high-humidity environments. The phenolic does well in where
lubricant is scarce as it has a wicking effect to retain and attract lubricants
when present. |
| |
|
 |
Polyimide Retainers
Ease of machining and less prone to developing swears during small
diameter drilling operations make it a good choice for retainers
used in ball bearings. They are many proprietary grades and
variations of polyimide available today. |
| |
|
SR144TL = (with Torlon Retainers)
SR144Ti = (with Phenolic Retainers)
SR144TA = (with Polyimide Retainers) |
|
D/G |
Deep Groove Ball Bearings, Radial Bearings (This is standard Type) |
|
A/C: |
Angular Contact Ball Bearings |
| ABEC-7 |
Precision
Grade: P4, ABEC 7P (=JIS4), used for high speed dental handpiece |
| Rings |
AISI 440C stainless steel for inner ring and outer ring, or named 9Cr18Mo
SR144 (S=Stainless Steel)
SFR144TLGZW
(G=a unique groove in outer ring) |
| Shields |
SR144 (=without shield)
SR144Z (Z=with one shield)
SFR144TLGZ1W (Z1=Shield & Outer ring is combined, also known as integral shield
)
Golden Shield is available! |
|
Grooved: |
means
Stepped, with step in outer ring. |
|
Smooth: |
The outher ring is
Plain, straight |
|
P5:
|
Precision Grade: ABEC 5, ABEC 5P, used for low speed dental handpiece |
|
Order Notice: |
|
1)
Please mention our Reference Number when you order, so as to send the
prices to you easily. |
|
2)
If you can not confirm your specific items , you can send your
requirements in details such as follows:
High Speed Dental
Radial Bearings
dated on Nov. 25, 2003; Midwest Tradition Turbine (Flanged bearing,
Frontal Bearing, Radial Bearing, Back Bearing) dated on Nov. 11, 2003 |
|
3)
Delivery time: For most items dental bearings, we have stock quantity in
warehouse, and the delivery time will be
1-7 days only after receiving T/T advance or L/C. |
|
Packings |
|
![Vacuum Poly-bag, Plastic Bag Packing for dental Bearings, Popular demand has remained strong. We have added more and more styles of angular contact and hybrid ceramic ball bearings. Ceramic ball bearings are the fastest growing sector in the dental bearing industry. Japan is the largest producer of hybrid ceramic bearings. copyright(c) 2005 VDSC all rights reserved Choose between Torlon(R) PAI, Textolite(TM) Phenolic or our own unique polyimide resin flexi-cage. Our bearings are now subjected to DEEP CRYOGENIC PROCESS technology. This aligns the atomic structure of the "grain" in the metal to allow outstanding stability and maintain strictest ISO, DIN and JIS4 [ABEC7+] tolerances. All bearings are assembled in a Class 100 White Room facility. Packed in poly tubes by quantity. TORLON - PHENOLIC - VESPEL Ball Retainers! We stock shim spacers that go in between the impeller and bearing. Three thicknesses available @ .40 ea](Images/dental-bearing-packing.jpg) |
Vacuum Poly Bag Packing
Keep it more long time.
Retailer & Wholesaler & Dentist Clinic
Repair & After market |
|
 |
Plastic Tube Packing
Save the Space
Industrial Packing
for OEM, or End Users
delivery to Wholesaler and Handpiece factory |
|
|
|
|
|
|
|
|
2nd update on March 21, 2006
1st update on March 17, 2005 |
|
Copyright © 2003-2005,
Ningbo TBP Group Co., Ltd. All rights reserved.
Site Map |
Tags: (Ceramic Dental Bearings available for each item number.) it is also named
Hybrid ceramic ball bearing, hybrid ceramic dental bearing, hybrid ceramic high
speed bearing, hybrid ceramic super precision bearing, hybrid ceramic miniature
bearing.
polyimide, /stainless steel / PEEK, (for cages, ball retainers, separators)
Cageless: Full complement design, Full Complement Bearings, (Full balls Surgical
dental bearings) HS: High Speed dental bearing, 350-400,000 RPM; LS: Low Speed,
50,000 RPM K1Inner Ring Separately, Angular Contact Radial Bearing K2 Outer Ring
Separately, Angular Contact Radial Bearing dental bearing drawing, World Class Technology, Super Precision Grade, High Speed Ball Bearings!
We can provide a range of dental hand piece bearings from a broad range of authentic original equipment bearing manufacturers. If you have requirements then ideally we would like the bearing part number as this will ensure that you receive exactly the part you require. Alternatively you can use our visual selection guide as an aid to choosing the bearings you need replacing With advances in bearing design, dental hand piece bearings have evolved to give extended life and performance possibilities. With the increasingly economic options for ceramic components, many dental designs have ceramic elements although this is by no means the ultimate answer to all dental requirements. Typical handpiece and accessory brand names we can help you with include: (click on the name to see a summary of the models we can provide bearings for.
SR144TL (S418MCK) SR144TLZ (S418MCKH) SR144TLK (C93KXA6) SR144TLKZ SR144TLZ1S
SR144STLKZ1S SR144TLZ1W SR144TLZW (WH) SR144TLKZ1W SR144TLKZW (ST-R3)
SFR144TLGZW SFR144TLZW (S418FMCKH) SFR144TLGZ1W SR2-5TLZW (DCMB) SR144TLW1.9
SFR144TLZ SR2-5TLZ SR2-5TLZZW SR144TLZ1 SFR144TLZ1W SR144TLW SR144TLKZ1 |
|
